Automatic Light Switching: Difference between revisions

From CSCWiki
Jump to navigation Jump to search
m (Created page with "= Overview = We want to hook up servos to the light switches to automatically turn the office lights on/off when the main door opens/closes. = Status = In Progress. Initial att…")
 
 
Line 5: Line 5:
= Status =
= Status =
In Progress. Initial attempt failed due to insufficient stall torque on the servos (HXT900). Will retry with HS-645MG Ultra-Torque servos.
In Progress. Initial attempt failed due to insufficient stall torque on the servos (HXT900). Will retry with HS-645MG Ultra-Torque servos.

UPDATE: New servos seem to work well. Prototype implemented and running. Only final installation/cleanup required now. A more portable power supply is also required


= Materials =
= Materials =

Latest revision as of 12:03, 19 March 2012

Overview

We want to hook up servos to the light switches to automatically turn the office lights on/off when the main door opens/closes.

Status

In Progress. Initial attempt failed due to insufficient stall torque on the servos (HXT900). Will retry with HS-645MG Ultra-Torque servos.

UPDATE: New servos seem to work well. Prototype implemented and running. Only final installation/cleanup required now. A more portable power supply is also required

Materials

  • 2 Laser cut mounts (kspaans/mimcpher have access to the kwartzlab laser cutter)
  • 2 HXT900 servos

Resources

Code: "git clone ~j3parker/src/lights/"