SNMP: Difference between revisions

From CSCWiki
Jump to navigation Jump to search
m (Fix spelling)
 
(6 intermediate revisions by 5 users not shown)
Line 1: Line 1:
= UPS =
The Computer Science Club runs Net-SNMP on all of our host machines. This provides real-time data on network, cpu and disk load, as well as memory usage. We also record temperature and fan speed data for capable hosts. On caffeine, we record apache and postfix statistics.


We can monitor two of our UPSs via SNMP from any host on our 10.15.134.0/24 subnet (see [[Machine_List#UPS|Machine List]]):
== Debian ==


== Debian Setup ==
* sudo apt-get install snmpd
* sudo nano /etc/default/snmp
** Remove the 127.0.0.1 part in the SNMPDOPTS line
* sudo nano /etc/snmp/snmpd.conf
** Remove or comment the following line: com2sec paranoid default public
** Under the existing com2sec lines, add the following: com2sec readonly 129.97.134.0/24 public
** If you want to query locally, you can add this line: com2sec readonly 127.0.0.1/24 public
** Find the lines starting with syslocation and syscontact and fill them in accordingly
* sudo invoke-rc.d snmpd restart


Install snmp and snmp-mibs-downloader (note: snmp-mibs-downloader is not available in stretch repository, so just download the deb from sid).
If you want to enable sensors, you'll need to get lm-sensors installed and working. Then you'll need to restart snmpd (sudo invoke-rc.d snmpd restart).


Download https://nagios.cscf.uwaterloo.ca/kiosk/powernet416.mib and place it in /usr/share/snmp/mibs
== Windows ==


Run `download-mibs`
There is a Windows distribution of Net-SNMP.

== Getting Status ==

snmpget -v 1 -c MSO mc-3015-h7-ups-1.cs.uwaterloo.ca PowerNet-MIB::upsBasicOutputStatus.0

This will return something like:

PowerNet-MIB::upsBasicOutputStatus.0 = INTEGER: onLine(2)

Latest revision as of 13:21, 16 December 2015

UPS

We can monitor two of our UPSs via SNMP from any host on our 10.15.134.0/24 subnet (see Machine List):

Debian Setup

Install snmp and snmp-mibs-downloader (note: snmp-mibs-downloader is not available in stretch repository, so just download the deb from sid).

Download https://nagios.cscf.uwaterloo.ca/kiosk/powernet416.mib and place it in /usr/share/snmp/mibs

Run `download-mibs`

Getting Status

   snmpget -v 1 -c MSO mc-3015-h7-ups-1.cs.uwaterloo.ca PowerNet-MIB::upsBasicOutputStatus.0

This will return something like:

   PowerNet-MIB::upsBasicOutputStatus.0 = INTEGER: onLine(2)