SNMP

From CSCWiki
Revision as of 04:21, 26 August 2007 by Dtbartle (talk | contribs) (New page: == Debian == * sudo apt-get install snmpd * sudo nano /etc/default/snmp ** Remove the 127.0.0.1 part in the SNMPDOPTS line * sudo nano /etc/snmp/snmpd.conf ** Under the existing com2sec l...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Debian

  • sudo apt-get install snmpd
  • sudo nano /etc/default/snmp
    • Remove the 127.0.0.1 part in the SNMPDOPTS line
  • sudo nano /etc/snmp/snmpd.conf
    • Under the existing com2sec lines, add the following: com2sec readonly 129.97.134.36 public
    • If you want to query locally, you can add this line: com2sec readonly 127.0.0.1/24 public
    • Find the lines starting with syslocation and sysconact and fill them in accordingly
  • sudo invoke-rc.d snmpd restart

If you want to enable sensors, you'll need to get lm-sensors installed and working. Then you'll need to restart snmpd (sudo invoke-rc.d snmpd restart).