Serial Connections: Difference between revisions

From CSCWiki
Jump to navigation Jump to search
No edit summary
(→‎MC 3015: Update console table and remove binaerpilot/ascorbic-acid)
 
(53 intermediate revisions by 5 users not shown)
Line 1: Line 1:
This article documents the physical serial ports on each machine and the connections between them. These connections are used for console access using [[Conserver]].
== Serial Connections ==


==== MC 3015 ====
==== MC 3015 ====


taurine ttyS1 LOM <- calum vsp
Local machine | Local TTY | Remote machine | Remote TTY | Baud rate
-------------------+------------+---------------------+------------+----------
ascorbic-acid ttyS0 LOM <- artificial-flavours ttyS0
ginseng ttya <- taurine ttyS0
corn-syrup ttyS1 LOM <- corn-syrup-ipmi - 57600
mirror ttyS1 LOM <- sodium-benzoate-ipmi - 57600
potassium-citrate ttyS0 <- ascorbic-acid ttyS1
citric-acid ttyS0 <- potassium-citrate ttyS1
taurine ttyS1 LOM <- taurine-ilo - 115200
caffeine ttyS0 <- citric-acid ttyS1
glomag ttyS0 LOM <- glomag-ipmi - 115200
goto80 ttyS0 <- corn-syrup N/A 115200
goto80 ttyS1 <- corn-syrup N/A 115200
goto80 power <- corn-syrup N/A 115200
potassium-citrate ttyS0 <- corn-syrup:ttyUSB2 hub3 115200
aspartame ttyS0 <- corn-syrup:ttyUSB4 hub5 115200
electrons - <- corn-syrup hub8 9600

The "hubN" ports are on the 8-port serial hub. To access, look in /dev/csc, or just use ttyUSB[N-1] directly.


== Machine Ports ==
== Machine Ports ==


Most machines either have no serial ports, or one DB9 serial port. Details of other configurations are listed here.
Most machines either have no serial ports, or one [[Serial_Pin-outs#RS-232_over_DE-9|DE-9]] serial port. Details of other configurations are listed here. We do not have any modems (DCE), so all connections should be crossed (i.e., use null modem cables or compatible).


==== taurine ====
==== taurine ====
Line 18: Line 26:
taurine has a virtual serial port that can be accessed via telnet or SSH
taurine has a virtual serial port that can be accessed via telnet or SSH


ttyS0 physical DB9
ttyS0 physical DE-9
ttyS1 virtual
ttyS1 virtual


==== ascorbic-acid ====
==== ascorbic-acid ====


ascorbic-acid has two Sun 8P8C serial ports stacked vertically, with the first port on top
ascorbic-acid has two [[Serial_Pin-outs#RS-232_over_8P8C_.28Sun.29|Sun 8P8C]] serial ports stacked vertically, with the first port on top. The first port may be used to access LOM, and probably has to be set to 9600 baud.


A (ttyS0, LOM)
A (ttyS0, LOM)
B (ttyS1)
B (ttyS1)


These ports should be connected to another system's DB9 using a DB9<->8P8C modular jack and an [[Server_serial_port_connections#Almost_Rollover_Cable|Almost Rollover]] or standard rollover.
These ports should be connected to another system's DE-9 using a DE-9<->8P8C modular adapter and an [[Serial_Pin-outs#Almost_Rollover_Cable|Almost Rollover]] or standard rollover.


==== potassium-citrate ====
==== potassium-citrate ====


potassium-citrate has two DB9 serial ports side by side, with the second port on the left
potassium-citrate has two DE-9 serial ports side by side, with the second port on the left


101102 (ttyS1) 101101 (ttyS0)
101102 (ttyS1) 101101 (ttyS0)


==== citric-acid ====
==== sodium-citrate ====

sodium-citrate has two DE-9 serial ports side by side, with the second port on the left

ttyS1 ttyS0

==== dumbterm ====


dumbterm has one DB-25 serial port. It is currently connected to a black [[Serial_Pin-outs#Grey_DB-25_Female_to_8P8C_Adapter|nonstandard DB-25<->8P8C adapter]], to a [[Serial_Pin-outs#Dumbterm_Cable|special twisted pair cable]], to a [[Serial_Pin-outs#Black_DE-9_Female_to_8P8C_Adapter|nonstandard 8P8C<->DE-9 adapter]]. All of these pieces are labeled "dumbterm". The dumbterm cable is not symmetric; the end labeled "DE-9" must be plugged into the DE-9 adapter.
citric-acid has two DB9 serial ports stacked vertically, with the second port on the bottom, and a dead DB9 labeled "modem" to its right


[[Category:Hardware]]
ttyS0 X
ttyS1 modem

Latest revision as of 14:20, 26 October 2015

This article documents the physical serial ports on each machine and the connections between them. These connections are used for console access using Conserver.

MC 3015

Local machine      | Local TTY  | Remote machine      | Remote TTY | Baud rate
-------------------+------------+---------------------+------------+----------
corn-syrup           ttyS1 LOM <- corn-syrup-ipmi       -                57600
mirror               ttyS1 LOM <- sodium-benzoate-ipmi  -                57600
taurine              ttyS1 LOM <- taurine-ilo           -               115200
glomag               ttyS0 LOM <- glomag-ipmi           -               115200
goto80               ttyS0     <- corn-syrup            N/A             115200
goto80               ttyS1     <- corn-syrup            N/A             115200
goto80               power     <- corn-syrup            N/A             115200
potassium-citrate    ttyS0     <- corn-syrup:ttyUSB2    hub3            115200
aspartame            ttyS0     <- corn-syrup:ttyUSB4    hub5            115200    
electrons            -         <- corn-syrup            hub8              9600

The "hubN" ports are on the 8-port serial hub. To access, look in /dev/csc, or just use ttyUSB[N-1] directly.

Machine Ports

Most machines either have no serial ports, or one DE-9 serial port. Details of other configurations are listed here. We do not have any modems (DCE), so all connections should be crossed (i.e., use null modem cables or compatible).

taurine

taurine has a virtual serial port that can be accessed via telnet or SSH

ttyS0 physical DE-9
ttyS1 virtual

ascorbic-acid

ascorbic-acid has two Sun 8P8C serial ports stacked vertically, with the first port on top. The first port may be used to access LOM, and probably has to be set to 9600 baud.

A (ttyS0, LOM)
B (ttyS1)

These ports should be connected to another system's DE-9 using a DE-9<->8P8C modular adapter and an Almost Rollover or standard rollover.

potassium-citrate

potassium-citrate has two DE-9 serial ports side by side, with the second port on the left

101102 (ttyS1) 101101 (ttyS0)

sodium-citrate

sodium-citrate has two DE-9 serial ports side by side, with the second port on the left

ttyS1 ttyS0

dumbterm

dumbterm has one DB-25 serial port. It is currently connected to a black nonstandard DB-25<->8P8C adapter, to a special twisted pair cable, to a nonstandard 8P8C<->DE-9 adapter. All of these pieces are labeled "dumbterm". The dumbterm cable is not symmetric; the end labeled "DE-9" must be plugged into the DE-9 adapter.