Serial Connections: Difference between revisions

From CSCWiki
Jump to navigation Jump to search
No edit summary
(→‎MC 3015: Update console table and remove binaerpilot/ascorbic-acid)
 
(20 intermediate revisions by 4 users not shown)
Line 3: Line 3:
==== MC 3015 ====
==== MC 3015 ====


corn-syrup ttyS1 LOM <- corn-syrup-ipmi - 57600
Local machine | Local TTY | Remote machine | Remote TTY | Baud rate
-------------------+------------+---------------------+------------+----------
mirror ttyS1 LOM <- sodium-benzoate-ipmi - 57600
taurine ttyS1 LOM <- calum - 115200
corn-syrup ttyS1 LOM <- corn-syrup-ipmi - 57600
mirror ttyS1 LOM <- sodium-benzoate-ipmi - 57600
ascorbic-acid ttyS0 LOM <- artificial-flavours ttyS0 9600
taurine ttyS1 LOM <- taurine-ilo - 115200
citric-acid ttyS0 LOM <- potassium-citrate ttyS1 9600
glomag ttyS0 LOM <- glomag-ipmi - 115200
goto80 ttyS0 <- corn-syrup N/A 115200
ginseng ttyS0 <- corn-syrup ttyS0 115200
goto80 ttyS1 <- corn-syrup N/A 115200
potassium-citrate ttyS0 <- ascorbic-acid ttyS1 9600
goto80 power <- corn-syrup N/A 115200
caffeine ttyS0 <- taurine ttyS0 115200
potassium-citrate ttyS0 <- corn-syrup:ttyUSB2 hub3 115200
aspartame ttyS0 <- corn-syrup:ttyUSB4 hub5 115200
electrons - <- corn-syrup hub8 9600


The "hubN" ports are on the 8-port serial hub. To access, look in /dev/csc, or just use ttyUSB[N-1] directly.
==== MC 3036 ====

phosphoric-acid ttyS0 <- sodium-citrate ttyS0 115200
sodium-citrate ttyS1 <- phosphoric-acid ttyS1 115200
acesulfame-potassium ttyS0 <- natural-flavours ttyS0 115200
dumbterm <- caramel-colour ttyS1 19200


== Machine Ports ==
== Machine Ports ==
Line 46: Line 43:


101102 (ttyS1) 101101 (ttyS0)
101102 (ttyS1) 101101 (ttyS0)

==== citric-acid ====

citric-acid has two DE-9 serial ports stacked vertically, with the second port on the bottom, and a dead DE-9 labeled "modem" to its right. The first port must be run at 9600 baud to access the embedded remote console.

ttyS0
ttyS1 modem


==== sodium-citrate ====
==== sodium-citrate ====
Line 59: Line 49:


ttyS1 ttyS0
ttyS1 ttyS0

==== caramel-colour ====

caramel-colour has two DE-9 serial ports

ttyS0 on motherboard I/O shield
ttyS1 on motherboard in a PCI header

==== phosphoric-acid ====

phosphoric-acid has two DE-9 serial ports

ttyS0 on motherboard I/O shield
ttyS1 on motherboard in a PCI header


==== dumbterm ====
==== dumbterm ====


dumbterm has one DB-25 serial port. It is currently connected to a black [[Serial_Pin-outs#Grey_DB-25_Female_to_8P8C_Adapter|nonstandard DB-25<->8P8C adapter]], to a [[Serial_Pin-outs#Dumbterm_Cable|special twisted pair cable]], to a [[Serial_Pin-outs#Black_DE-9_Female_to_8P8C_Adapter|nonstandard 8P8C<->DE-9 adapter]]. All of these pieces are labeled "dumbterm". The dumbterm cable is not symmetric; the end labeled "DE-9" must be plugged into the DE-9 adapter.
dumbterm has one DB-25 serial port. It is currently connected to a black [[Serial_Pin-outs#Grey_DB-25_Female_to_8P8C_Adapter|nonstandard DB-25<->8P8C adapter]], to a [[Serial_Pin-outs#Dumbterm_Cable|special twisted pair cable]], to a [[Serial_Pin-outs#Black_DE-9_Female_to_8P8C_Adapter|nonstandard 8P8C<->DE-9 adapter]]. All of these pieces are labeled "dumbterm". The dumbterm cable is not symmetric; the end labeled "DE-9" must be plugged into the DE-9 adapter.

[[Category:Hardware]]

Latest revision as of 14:20, 26 October 2015

This article documents the physical serial ports on each machine and the connections between them. These connections are used for console access using Conserver.

MC 3015

Local machine      | Local TTY  | Remote machine      | Remote TTY | Baud rate
-------------------+------------+---------------------+------------+----------
corn-syrup           ttyS1 LOM <- corn-syrup-ipmi       -                57600
mirror               ttyS1 LOM <- sodium-benzoate-ipmi  -                57600
taurine              ttyS1 LOM <- taurine-ilo           -               115200
glomag               ttyS0 LOM <- glomag-ipmi           -               115200
goto80               ttyS0     <- corn-syrup            N/A             115200
goto80               ttyS1     <- corn-syrup            N/A             115200
goto80               power     <- corn-syrup            N/A             115200
potassium-citrate    ttyS0     <- corn-syrup:ttyUSB2    hub3            115200
aspartame            ttyS0     <- corn-syrup:ttyUSB4    hub5            115200    
electrons            -         <- corn-syrup            hub8              9600

The "hubN" ports are on the 8-port serial hub. To access, look in /dev/csc, or just use ttyUSB[N-1] directly.

Machine Ports

Most machines either have no serial ports, or one DE-9 serial port. Details of other configurations are listed here. We do not have any modems (DCE), so all connections should be crossed (i.e., use null modem cables or compatible).

taurine

taurine has a virtual serial port that can be accessed via telnet or SSH

ttyS0 physical DE-9
ttyS1 virtual

ascorbic-acid

ascorbic-acid has two Sun 8P8C serial ports stacked vertically, with the first port on top. The first port may be used to access LOM, and probably has to be set to 9600 baud.

A (ttyS0, LOM)
B (ttyS1)

These ports should be connected to another system's DE-9 using a DE-9<->8P8C modular adapter and an Almost Rollover or standard rollover.

potassium-citrate

potassium-citrate has two DE-9 serial ports side by side, with the second port on the left

101102 (ttyS1) 101101 (ttyS0)

sodium-citrate

sodium-citrate has two DE-9 serial ports side by side, with the second port on the left

ttyS1 ttyS0

dumbterm

dumbterm has one DB-25 serial port. It is currently connected to a black nonstandard DB-25<->8P8C adapter, to a special twisted pair cable, to a nonstandard 8P8C<->DE-9 adapter. All of these pieces are labeled "dumbterm". The dumbterm cable is not symmetric; the end labeled "DE-9" must be plugged into the DE-9 adapter.