Cloud: Compute Node Setup: Difference between revisions

Latest revision as of 20:58, 29 December 2021

UPDATE: this page is deprecated, as it is for the old cloud which used OpenStack. We are now using CloudStack instead.

Machine setup

Disk configuration

A block device with lost of disk space (to be mounted at /var/lib/nova/instances)

Networking configuration

Do not register the IPv6 address in DNS. This may cause issues with OpenStack services.

We will be using 2 interfaces on the machine:

1gbps for management (VLAN 529 (CSC Cloud Management))
10gbps for VMs (VLAN 134 (MSO), 425 (CSC Cloud))

Fix ebtables

update-alternatives --config ebtables

and choose "ebtables-legacy". This is necessary to work around missing features in ebtables-nft.

`/etc/sysctl.d/10-ipv6.conf`

# Disable autoconf
net.ipv6.conf.all.autoconf=0
net.ipv6.conf.default.autoconf=0

# Stop accepting router advertisments
net.ipv6.conf.all.accept_ra=0                                                                       
net.ipv6.conf.default.accept_ra=0

# Do not use temporary addresses
net.ipv6.conf.all.use_tempaddr=0                                                                    
net.ipv6.conf.default.use_tempaddr=0

`/etc/network/interfaces`

Configure the switch port with VLAN 529 as the untagged VLAN, and VLANs 134 and 425 as the tagged VLANs.

# Management interface
auto $INTERFACE
iface $INTERFACE inet static
   address        172.19.168.XX
   netmask        255.255.255.224
   gateway        172.19.168.1

iface $INTERFACE inet6 static
   address fd74:6b6a:8eca:4902::XX
   netmask 64
   gateway fd74:6b6a:8eca:4902::1

#################
# VM NETWORKING #
#################

auto $INTERFACE.134
iface $INTERFACE.134 inet manual
iface $INTERFACE.134 inet6 manual
   vlan-raw-device $INTERFACE

auto $INTERFACE.425
iface $INTERFACE.425 inet manual
iface $INTERFACE.425 inet6 manual
   vlan-raw-device $INTERFACE

Compute service

Prerequisites

debian.csclub APT repository configured

Installation

Configure virtualization

sudo apt install qemu qemu-kvm libvirt-bin bridge-utils

Install Nova Compute

Based on the official OpenStack document:

sudo apt install nova-compute neutron-linuxbridge-agent

Now configure:

`/etc/nova/nova.conf`

[DEFAULT]                                                                                                                                                                                                                                      
state_path=/var/lib/nova                                                                                                                                                                                                                       
enabled_apis=osapi_compute,metadata                                                                                                                                                                                                            
transport_url=rabbit://$USER:$PASS@rabbit.cloud.csclub.uwaterloo.ca                                                                                                                                               
auth_strategy=keystone                                                                                                                                                                                                                         
my_ip=172.19.168.XX                                                                                                                                                                                                                      
use_neutron=true                                                                                                                                                                                                                               
firewall_driver=nova.virt.firewall.NoopFirewallDriver                                                                                                                                                                                          
default_availability_zone = csc-mc                                                                                                                                                                                                             
compute_monitors =  cpu.virt_driver,numa_mem_bw.virt_driver 

[oslo_concurrency]
lock_path=/var/lock/nova

[database]
connection=mysql+pymysql://$USER:$PASS@db.cloud.csclub.uwaterloo.ca/nova_api

[libvirt]                                                                                           
use_virtio_for_bridges=True                                                                         
inject_password=true                                                                                
live_migration_flag = VIR_MIGRATE_UNDEFINE_SOURCE,VIR_MIGRATE_PEER2PEER,VIR_MIGRATE_LIVE,VIR_MIGRATE_TUNNELLED
block_migration_flag = VIR_MIGRATE_UNDEFINE_SOURCE, VIR_MIGRATE_PEER2PEER, VIR_MIGRATE_LIVE, VIR_MIGRATE_TUNNELLED, VIR_MIGRATE_NON_SHARED_INC
cpu_mode = custom
cpu_model = Broadwell

[keystone_authtoken]
auth_uri = https://auth.cloud.csclub.uwaterloo.ca
auth_url = https://admin.cloud.csclub.uwaterloo.ca
memcached_servers = memcache1.cloud.csclub.uwaterloo.ca:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = $USER
password = $PASS

[vnc]
enabled = true
vncserver_listen = 0.0.0.0
vncserver_proxyclient_address = $my_ip
novncproxy_base_url = https://console.cloud.csclub.uwaterloo.ca/vnc_auto.html

[glance]
api_servers = https://image.cloud.csclub.uwaterloo.ca

[neutron]
url = https://network.cloud.csclub.uwaterloo.ca
auth_url = https://admin.cloud.csclub.uwaterloo.ca
auth_type = password
project_domain_name = Default 
user_domain_name = Default
project_name = service
region_name = csc-mc
username = $USER
password = $PASS

[placement]
os_region_name = csc-mc
project_domain_name = Default
project_name = service
auth_type = password
user_domain_name = Default
auth_url = https://admin.cloud.csclub.uwaterloo.ca/v3
username = $USER
password = $PASS

`/etc/neutron/neutron.conf`

[DEFAULT]
# ...
transport_url=$USER:$PASS@rabbit.cloud.csclub.uwaterloo.ca
auth_strategy=keystone

[keystone_authtoken]
auth_uri = https://auth.cloud.csclub.uwaterloo.ca
auth_url = https://admin.cloud.csclub.uwaterloo.ca
memcached_servers = memcache1.cloud.csclub.uwaterloo.ca:11211
auth_type = password
project_domain_name = Default
user_domain_name = Default
project_name = service
username = $USER
password = $PASS

`/etc/neutron/plugins/ml2/linuxbridge_agent.ini`

[linux_bridge]
physical_interface_mappings=mso-internet:$INTERFACE.134, mso-intranet:$INTERFACE.425

[securitygroup]
enable_security_group = true
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver

[vxlan]
enable_vxlan=true
local_ip=172.19.168.XX
l2_population=true

Then:

sudo systemctl restart nova-compute neutron-linuxbridge-agent

Add mapping

On controller1.cloud:

. ~/cloud-admin
su -s /bin/sh -c "nova-manage cell_v2 discover_hosts --verbose" nova

Setup migration

Add SSH keys for root and nova on each compute node
Change nova user shell to /bin/sh
Enable --listen flag for Libvirt (/etc/default/libvirtd)
Enable listen_tcp and auth_mode_tcp = none in /etc/libvirt/libvirtd.conf

@@ Line 1: / Line 1: @@
+UPDATE: this page is deprecated, as it is for the old cloud which used OpenStack. We are now using [[CloudStack]] instead.
-'''NOTE: These instructions are a WIP'''
 == Machine setup ==
@@ Line 5: / Line 5: @@
 === Disk configuration ===
+A block device with lost of disk space (to be mounted at /var/lib/nova/instances)
-/var/lib/nova/instances should be mounted to somewhere with lots of space (after installed)
 === Networking configuration ===
+'''Do not register the IPv6 address in DNS. This may cause issues with OpenStack services.'''
 We will be using 2 interfaces on the machine:
@@ Line 13: / Line 15: @@
 * 1gbps for management (VLAN 529 (CSC Cloud Management))
 * 10gbps for VMs (VLAN 134 (MSO), 425 (CSC Cloud))
+==== Fix ebtables ====
+<pre>
+update-alternatives --config ebtables
+</pre>
+and choose "ebtables-legacy". This is necessary to work around missing features in ebtables-nft.
 ==== <code>/etc/sysctl.d/10-ipv6.conf</code> ====
@@ Line 29: / Line 39: @@
 ==== <code>/etc/network/interfaces</code> ====
+Configure the switch port with VLAN 529 as the untagged VLAN, and VLANs 134 and 425 as the tagged VLANs.
 <pre># Management interface
-auto eno1
+auto $INTERFACE
-iface eno1 inet static
+iface $INTERFACE inet static
-   address        172.19.168.23
+   address        172.19.168.XX
    netmask        255.255.255.224
    gateway        172.19.168.1
-iface eno1 inet6 static
+iface $INTERFACE inet6 static
-   address fd74:6b6a:8eca:4902::23
+   address fd74:6b6a:8eca:4902::XX
    netmask 64
    gateway fd74:6b6a:8eca:4902::1
@@ Line 46: / Line 58: @@
 #################
-auto enp94s0.134
+auto $INTERFACE.134
-iface enp94s0.134 inet manual
+iface $INTERFACE.134 inet manual
-iface enp94s0.134 inet6 manual
+iface $INTERFACE.134 inet6 manual
-   vlan-raw-device enp94s0
+   vlan-raw-device $INTERFACE
-auto enp94s0.425
+auto $INTERFACE.425
-iface enp94s0.425 inet manual
+iface $INTERFACE.425 inet manual
-iface enp94s0.425 inet6 manual
+iface $INTERFACE.425 inet6 manual
-   vlan-raw-device enp94s0
+   vlan-raw-device $INTERFACE
 </pre>
@@ Line 67: / Line 79: @@
 ==== Configure virtualization ====
+<code>sudo apt install qemu qemu-kvm libvirt-bin bridge-utils</code>
-<ol style="list-style-type: decimal;">
-<li><p>Allow syscom access to libvirt.</p>
-<p><code>/etc/polkit-1/localauthority/50-local.d/libvirt.pkla</code></p>
-<pre class="conf">[Allow syscom to libvirt]
-Identity=unix-group:syscom
-Action=org.libvirt.unix.manage
-ResultAny=yes</pre></li>
-<li><p><code>sudo apt install qemu qemu-kvm libvirt-bin bridge-utils</code></p></li></ol>
 ==== Install Nova Compute ====
+Based on the official OpenStack document:
-From:
 * https://docs.openstack.org/ocata/install-guide-ubuntu/nova-compute-install.html
@@ Line 94: / Line 99: @@
 transport_url=rabbit://$USER:$PASS@rabbit.cloud.csclub.uwaterloo.ca
 auth_strategy=keystone
-my_ip=$IP
+my_ip=172.19.168.XX
 use_neutron=true
 firewall_driver=nova.virt.firewall.NoopFirewallDriver
@@ Line 175: / Line 180: @@
 <pre class="conf">[linux_bridge]
-physical_interface_mappings=mso-internet:enp94s0.134, mso-intranet:enp94s0.425
+physical_interface_mappings=mso-internet:$INTERFACE.134, mso-intranet:$INTERFACE.425
 [securitygroup]
@@ Line 183: / Line 188: @@
 [vxlan]
 enable_vxlan=true
-local_ip=172.19.168.23
+local_ip=172.19.168.XX
 l2_population=true</pre>
 Then:
@@ Line 199: / Line 204: @@
 * Add SSH keys for root and nova on each compute node
+* Change nova user shell to /bin/sh
 * Enable <code>--listen</code> flag for Libvirt (/etc/default/libvirtd)
 * Enable listen_tcp and auth_mode_tcp = none in /etc/libvirt/libvirtd.conf

Cloud: Compute Node Setup: Difference between revisions

Latest revision as of 20:58, 29 December 2021

Contents

Machine setup

Disk configuration

Networking configuration

Fix ebtables

`/etc/sysctl.d/10-ipv6.conf`

`/etc/network/interfaces`

Compute service

Prerequisites

Installation

Configure virtualization

Install Nova Compute

`/etc/nova/nova.conf`

`/etc/neutron/neutron.conf`

`/etc/neutron/plugins/ml2/linuxbridge_agent.ini`

Add mapping

Setup migration

Navigation menu

Cloud: Compute Node Setup: Difference between revisions

Latest revision as of 20:58, 29 December 2021

Machine setup

Disk configuration

Networking configuration

Fix ebtables

/etc/sysctl.d/10-ipv6.conf

/etc/network/interfaces

Compute service

Prerequisites

Installation

Configure virtualization

Install Nova Compute

/etc/nova/nova.conf

/etc/neutron/neutron.conf

/etc/neutron/plugins/ml2/linuxbridge_agent.ini

Add mapping

Setup migration

Navigation menu

Search

`/etc/sysctl.d/10-ipv6.conf`

`/etc/network/interfaces`

`/etc/nova/nova.conf`

`/etc/neutron/neutron.conf`

`/etc/neutron/plugins/ml2/linuxbridge_agent.ini`