Latest revision as of 13:21, 16 December 2015

UPS

We can monitor two of our UPSs via SNMP from any host on our 10.15.134.0/24 subnet (see Machine List):

Install snmp and snmp-mibs-downloader (note: snmp-mibs-downloader is not available in stretch repository, so just download the deb from sid).

Run `download-mibs`

   snmpget -v 1 -c MSO mc-3015-h7-ups-1.cs.uwaterloo.ca PowerNet-MIB::upsBasicOutputStatus.0

This will return something like:

   PowerNet-MIB::upsBasicOutputStatus.0 = INTEGER: onLine(2)

@@ Line 1: / Line 1: @@
+= UPS =
-The Computer Science Club runs Net-SNMP on all of our host machines. This provides real-time data on network, cpu and disk load, as well as memory usage. We also record temperature and fan speed data for capable hosts. On caffeine, we record apache and postfix statistics.
+We can monitor two of our UPSs via SNMP from any host on our 10.15.134.0/24 subnet (see [[Machine_List#UPS|Machine List]]):
-Installation of snmpd on our machines is done via puppet.
+== Debian Setup ==
-If you want to enable sensors:
-* sudo apt-get install lm-sensors
+Install snmp and snmp-mibs-downloader (note: snmp-mibs-downloader is not available in stretch repository, so just download the deb from sid).
-* sudo sensors-detect
-* sudo modprobe the recommended modules and them to /etc/modules as needed; run sensors to verify that correct modules are loaded and working
+Download https://nagios.cscf.uwaterloo.ca/kiosk/powernet416.mib and place it in /usr/share/snmp/mibs
-* sudo invoke-rc.d snmpd restart
+Run `download-mibs`
+== Getting Status ==
+    snmpget -v 1 -c MSO mc-3015-h7-ups-1.cs.uwaterloo.ca PowerNet-MIB::upsBasicOutputStatus.0
+This will return something like:
+    PowerNet-MIB::upsBasicOutputStatus.0 = INTEGER: onLine(2)