Robot Arm

Software

The robot arm was purchased with the intent of being used to create a mechanical turk. The code going towards this goal lives in ~ssalbiz/arm, use "git clone ~ssalbiz/arm" to make a copy.

Hardware

The arm is a Lynxmotion AL5D.

Operation

Currently the arm is controlled by interfacing directly with /dev/ttySx or /dev/ttyUSBx . The syntax for controlling this is by sending the following string to the board:

#<servo id> P<position> S<speed> T<time>

You can control multiple servos with one command

#<servo id> P<position> S<speed> #<servo id> P<position> S<speed> T<time>

S and T are optional parameters

Key:

• <servo id> - id of the servo being controlled (includes jaw)
• <position> - servo rotation position, generally between (500,2500)
• <speed> - speed of rotation; 100 means 10s to rorate 90°; leaving this off generates fast movement, 400 seems like a "safe" value?
• - time it takes to complete the motion in ms; specified once for the entire motion

if both speed(s) and time are specified, time is a "minimum" and speed is a "maximum", i.e. the motion will take at minimum T milliseconds, but servoA will move no faster than speed SA

Servo key and degree of motion

• 0 - Base
• 1 - Shoulder
• 2 - Elbow
• 3 - Wrist
• 4 - Grip
• 5 - Wrist Rotate

Purpose

The current purpose of the robot arm is to make an entity that can play chess against a human.

Status

In Progress. Need to complete the following:

• Complete physical modifications to robot arm to allow it to reach all pieces on the board
• Calibrate arm base mount against chess board squares
• Make the robot arm code talk to a chess program
• Make the chess program talk to the chess vision code

External Links

• a manual [1]
• j3parker's 3D model of the arm