SNMP
Jump to navigation
Jump to search
Debian
- sudo apt-get install snmpd
- sudo nano /etc/default/snmp
- Remove the 127.0.0.1 part in the SNMPDOPTS line
- sudo nano /etc/snmp/snmpd.conf
- Under the existing com2sec lines, add the following: com2sec readonly 129.97.134.36 public
- If you want to query locally, you can add this line: com2sec readonly 127.0.0.1/24 public
- Find the lines starting with syslocation and sysconact and fill them in accordingly
- sudo invoke-rc.d snmpd restart
If you want to enable sensors, you'll need to get lm-sensors installed and working. Then you'll need to restart snmpd (sudo invoke-rc.d snmpd restart).