Music

From CSCWiki
Revision as of 21:23, 10 June 2024 by Y266shen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Music is run off powernap, since that's the computer with the speakers attached.

Office staff/termcom/syscom permissions are required to play music in the office.

We also have MPD available, however this method is rarely used after 2022. kids these days

How to play music

  1. Run ssh [watid]@powernap.csclub.uwaterloo.ca
  2. Run bluetoothctl
  3. Type pairable on and discoverable on into the console to enable pairing and discovery
  4. Connect to powernap from your device
  5. Respond yes to all the prompts on the terminal from powernap
  6. Type trust [device_mac] to automatically allow audio from your device next time
  7. You should be able to play audio like a normal audio device now

How to control audio server

powernap uses PipeWire and can talk to PulseAudio client. To set volume, mute some audio stream, or change output setting, use an office terminal and do:

PULSE_SERVER=powernap.csclub.uwaterloo.ca pavucontrol

If you're using a Linux laptop then this should work too.

MPD Controls

To view the keybindings of ncmpcpp, press F1 while it's running. The number keys switch between tabs in it.

  • 1 is current playlist
  • 2 is browsing files
  • 3 is search
  • 4 is browsing the media library
  • 5 is browsing saved playlists, etc.

You can add your own absolutely legitimately obtained music by copying them to /music on powernap. Then type u in ncmpcpp to refresh the database.

Termcom Info